concrete solutions

for any environment

Traffic titan Series

Mechanically polished, exposed-concrete surfaces  

Surface shine 800

Aggregate Exposure Level: Class A - none
*Exposing mostly cement fines

Cement fines exposed 85-95% of SF
Fine aggregate exposed 5-15% of SF

  • Sheen: Gloss / High Gloss

  • Color options - Full range

  • Finished Texture: Extremely Smooth 

The Shinecrete Classic Cut

Aggregate Exposure Level: Class B - minimal or moderate
*Exposing mostly fine aggregates (sand)

Fine aggregates exposed 85-95% of SF
Blend of Cement Fines and Coarse Aggregates 5-15% of SF

  • Sheen: Gloss / High Gloss 

  • Color options - Full range

  • Finished Texture: Extremely Smooth 

showroom stone

Aggregate Exposure Level: Class C - Full exposure
*Exposing mostly large/coarse aggregates

Coarse aggregates exposed 80-90%
Blend of Cement Fines and Fine Aggregate 10-20%

  • Sheen: Gloss / High Gloss 

  • Color options - Full range

  • Finished Texture: Extremely Smooth 

Stain Master Series

Breathable sealers and coatings that provide a protective layer for exposed concrete

Standard Seal-crete

Thin build sealer, multiple coats

  1. Grind the concrete’s surface to remove contaminants and make any necessary repairs

  2. Refine to a smooth texture

  3. Apply 2 Coats of sealer

  • Sheen: Satin

  • Finished Texture: Semi-Smooth

  • Spill Resistance - 75%

  • Color Options - Full range 

Wet Room Warrior

Layered coats - Primer and Topcoat

  1. Grind the surface to remove contaminants and make any necessary repairs

  2. Refine to a semi smooth texture

  3. Coat the concrete with a clear primer

  4. Apply a chemical resistant clear topcoat

  • Sheen: Matte / Satin / Gloss

  • Finished Texture: Light / Medium / Heavy 

  • Spill Resistance - 99%

  • Color Options - Full range 

Pure & Simple Series

Basic Chemical treatments for new/bare exposed-concrete

Sacrificial Seal Coat

Topical hydrophobic Sealer

  1. Clean the new surface

  2. Make any necessary repairs

  3. Apply 2 Coats of water based sealer

  • Sheen: gloss

  • Finished Texture: Based on Original Concrete Finish 

  • Color options - Not Available  

Strength by saturation

Penetrating hardener and stain repellants

  1. Clean the bare/new surface

  2. Apply penetrating densifier/hardener to rejection

  3. Burnish/buff the surface

  4. Apply penetrating stain protector

  • Sheen: Satin

  • Finished Texture: Based on Original Concrete Finish

  • Color options - Not Available

Seam Sealer

2 Component Semi-rigid Joint filler application

  1. Clean out existing control joint cavities

  2. Protect concrete surface from overfill staining

  3. Overfill joint cavity with polyurea joint compound

  4. Let dry and shave flush with floor’s surface

  • Color options - Full range